Sorry, you need to enable JavaScript to visit this website.
Partager

Publications

Sont listées ci-dessous, par année, les publications figurant dans l'archive ouverte HAL.

2026

  • Determination of the Effective Permeabilities in Partially Saturated Porous Media, Using the Periodic Homogenization Technique
    • Bouchard Raphaël
    • Bourbatache Mohamed-Khaled
    • Le Tien Dung
    • Millet Olivier
    • Stefanou Ioannis
    Transport in Porous Media, Springer Verlag, 2026, 153 (4), pp.47. Abstract In this study, we address determination of the effective permeabilities in rigid, partially saturated porous media for an immiscible two-phase Newtonian fluid flow. The periodic homogenization technique is applied to derive macroscopic flow laws for two-phase systems from the pore-scale Navier–Stokes equations governing immiscible fluids. Two distinguished cases are considered: two incompressible fluids (case 1) and an incompressible fluid with a compressible one (case 2). In both cases, the homogenized result shows the independence of the macroscopic laws and the closure problems on the fluid compressibility, except for the macroscopic mass conservation equation. Finally, numerical simulations are performed by solving the closure problems for a given interface position determined from the phase-field simulations, in order to analyze the role of each effective permeability in the generalized Darcy’s law for several fluid mixtures and different porosity. The numerical results offer insights into the influence of microstructure, fluid properties, and capillary bridge distribution on the effective permeabilities. (10.1007/s11242-025-02265-2)
    DOI : 10.1007/s11242-025-02265-2
  • Characterization of static and dynamic stall noise of a NACA0012 airfoil using the Lattice Boltzmann Method
    • Grimberg Milo
    • Cotté Benjamin
    • Jondeau Emmanuel
    • Vienne Lucien
    • Clair Vincent
    • Pestana Miguel
    • Boudet Jérôme
    , 2026. The prediction of aerodynamic and aeroacoustic phenomena associated with airfoil stall remains a challenging task due to the strong flow unsteadiness, large-scale separation, and broadband noise generation involved. In this study, the Lattice Boltzmann Method (LBM) is assessed for the simulation of static and dynamic stall noise of a NACA0012 airfoil by direct comparison with experimental data obtained during a dedicated measurement campaign [1]. Numerical simulations are performed at a Reynolds number of Re_c = 6.25 × 10 5 and a Mach number of Ma = 0.21 for both fixed and periodically pitching configurations. Static simulations cover angles of attack from 0° to 24° , while the dynamic case consists of a sinusoidal pitching motion at 4 Hz at a mean angles of 15° with an amplitude of ±7° . The numerical results are compared to experimental measurements of pressure coefficient distributions, lift coefficients, wall-pressure spectra, and farfield noise spectra. For the static configuration, the LBM simulations reproduce the main aerodynamic trends observed experimentally across pre-stall and post-stall regimes. A systematic offset between numerical and experimental results is identified and attributed to a difference between the nominal geometric angle of attack and the effective aerodynamic incidence. Once this offset is taken into account, good agreement is obtained in terms of pressure distributions, lift polar evolution, and far-field noise levels. In the dynamic configuration, the LBM captures the characteristic lift hysteresis associated with dynamic stall, as well as the temporal modulation of aerodynamic and acoustic quantities throughout the pitching cycle. In addition to integral metrics, the analysis of instantaneous fields provides qualitative insight into the spatial localization of dominant acoustic source regions, highlighting the role of the boundary layer and the trailing edge in noise radiation. Overall, the results demonstrate that the Lattice Boltzmann Method constitutes a reliable approach for predicting the aerodynamic and aeroacoustic response of airfoils under static and dynamic stall conditions at moderate Mach numbers.
  • Reduced order modelling for shell finite element structures using the direct parametrisation of invariant manifolds: Hardening/softening transition, resonant dynamics and mode selection
    • Xia Zixu
    • Touzé Cyril
    • Cong Yu
    • Gu Shuitao
    • Feng Zhi-Qiang
    Thin-Walled Structures, Elsevier, 2026, 220, pp.114329. The accurate simulation of the nonlinear dynamics of thin-walled structures is a critical but computationally demanding task. In this contribution, a 7-parameter solid-shell finite element formulation is combined with the direct parametrisation method for invariant manifolds (DPIM), in order to derive accurate and efficient reduced-order models (ROM) accounting for geometric nonlinearity. The method is illustrated in its ability to be used with different yet complementary purposes. On the one hand, low-order tractable models can be obtained, providing simple ROMs that are amenable to giving physical insights and understanding. On the other hand, higher-order solutions are available within the same framework, hence providing accurate and converged solutions. This scheme is carried out on examples with increasing complexity. First, the transition from hardening to softening behaviour for thin shells with shape imperfections is investigated. The 1:2 resonance as a driver of the change of type of nonlinearity is analysed, and a full understanding of the smooth transition is illustrated. Then, shells with varying thicknesses are investigated, and the case of 1:2 internal resonance is further investigated, showing the emergence of isolated solution branches (isola). In the course of the numerical simulations, it is shown how the reduced basis needs to be enlarged to take into account more and more complex resonance scenarios, and some guidelines are provided in order to help the analyst in selecting the master modes. The numerical results highlight the ability of the reduced-order models to provide a fully comprehensive and integrated framework for the understanding and accurate prediction of thin shells' nonlinear dynamics. (10.1016/j.tws.2025.114329)
    DOI : 10.1016/j.tws.2025.114329
  • Numerical relaxation techniques for mass transfer in three-phase liquid-vapor-gas flows
    • Pelanti Marica
    Computers and Fluids, Elsevier, 2026, 305, pp.106893. We describe liquid-vapor-gas flows by a hyperbolic single-velocity three-phase compressible flow model with instantaneous pressure relaxation that we studied in previous work. The model includes thermal relaxation terms to account for heat transfer, and chemical relaxation terms to describe mass transfer between the liquid and vapor phases. To numerically solve the model system we use a fractional step method where we alternate between the solution of the homogeneous system via finite volume HLLC-type schemes and the solution of systems of ordinary differential equations that take into account the relaxation source terms. In this work we propose a novel numerical procedure for chemical relaxation that can efficiently describe arbitrary-rate mass transfer, both slow finite-rate processes and stiff instantaneous ones. The main idea consists in describing the relaxation process by a system of ordinary differential equations that admits an analytical semi-exact exponential solution. This relaxation system is built by employing the relaxed models that can be derived analytically from the parent three-phase flow model in the limit of instantaneous mechanical and thermal relaxation processes, in order to guarantee the constraints of pressure and temperature equilibrium during phase transition. Some numerical experiments in one and two dimensions are presented to show the effectiveness of the proposed method. (10.1016/j.compfluid.2025.106893)
    DOI : 10.1016/j.compfluid.2025.106893
  • A harmonic balance normal form parametrisation for single mode reduction of nonlinear vibrating systems
    • Grolet Aurélien
    • Touzé Cyril
    • de Figueiredo Stabile André
    • Thomas Olivier
    Communications in Nonlinear Science and Numerical Simulation, Elsevier, 2026, 157, pp.109708. This paper introduces a model-order reduction technique for lightly damped nonlinear vibrating systems. By combining calculation details that are specific to the harmonic balance method, the asymptotic numerical method, and the normal form style parametrisation for invariant manifolds, a complete procedure that can cope with single-mode reduction is detailed. Introducing harmonic decomposition in the process allows for a different treatment of the temporal information of the solution, which comes with advantages as compared to normal form expansions based on polynomial expansions. The computation proceeds with two nested loops on both the harmonics and the polynomial degree expansion. A decisive advantage of the procedure is its ability to compute a new expansion from a known solution, which allows the derivation of amplitudedependent piecewise reduced order models (ROMs), together with an integrated procedure that can switch from the invariant manifolds computation attached to either fixed points or limit cycles. Once the validity limit of a first expansion is met, the procedure can restart from a point where convergence is reached and produce a new ROM. This feature has the potential to overcome the well-known limitations of asymptotic expansions associated with the parametrisation method for invariant manifolds, and is derived here only for conservative systems. The whole analysis also clearly establishes the links existing between the normal form approach and computations based on the harmonic balance combined with the asymptotic numerical method. Examples of increasing complexity, starting from a Duffing equation, a two-degree-of-freedom system and a finite element beam model, are analysed, and comparisons with existing techniques are provided. (10.1016/j.cnsns.2026.109708)
    DOI : 10.1016/j.cnsns.2026.109708
  • Review of "Asymptotic approaches for dealing with distorted crack geometries
    • Lazarus Véronique
    , 2026.
  • Normal form computation of nonlinear dispersion relationship for locally resonant metamaterial
    • Wang Tao
    • Touzé Cyril
    • Li Haiqin
    • Ding Qian
    Physica D: Nonlinear Phenomena, Elsevier, 2026, 488, pp.135115. This article is devoted to the application of the parametrisation method for invariant manifold with a complex normal form style (CNF), for the derivation of higher-order approximations of underdamped nonlinear dispersion relationships for periodic structures, more specifically by considering the case of a locally resonant metamaterial chain incorporating damping and various nonlinear stiffnesses. Two different strategies are proposed to solve the problem. In the first one, Bloch's assumption is first applied to the equations of motion. The nonlinear change of coordinates provided by the complex normal form style in the parametrisation method is applied. This direct procedure, which applies first the wave dependency to the original physical coordinates of the problem, is referred to as CNF-BP (for CNF applied with Bloch's assumption on physical coordinates). In the second strategy, the nonlinear change of coordinates provided by the parametrisation method, which relates the physical coordinates to the so-called normal coordinates, is first applied. Then the periodic assumption is used, thus imposing a Bloch wave ansatz on the normal coordinates. This method will be referred to as CNF-PN (for CNF with a periodic assumption on normal coordinates). In the conservative case, the two CNF calculation strategies are first verified by comparing with the results from existing literature. Subsequently, two carefully selected examples demonstrate that the CNF-PN strategy exhibits superior capability in capturing complex wave propagation phenomena, whereas the CNF-BP strategy encounters limitations in handling non-fundamental harmonics and the nonlinear interactions between host oscillators. The influence of truncation order on the accuracy of CNF-PN is further examined, demonstrating its effectiveness in extending the validity limit. For underdamped systems, the CNF-PN is systematically compared against numerical techniques, a classical analytical perturbation technique (the method of multiple scales), and direct numerical time integration of annular chain structures. The results confirm the exceptional accuracy of the CNF-PN in predicting nonlinear dispersion relationships, damping ratios, invariant manifolds, and wave attenuation characteristics, as long as the validity limit of the asymptotic expansion is not reached. This advancement provides a novel and efficient analytical and numerical tool for studying nonlinear metamaterials. (10.1016/j.physd.2026.135115)
    DOI : 10.1016/j.physd.2026.135115
  • Reduced order modelling of Hopf bifurcations for the Navier-Stokes equations through invariant manifolds
    • Colombo Alessio
    • Vizzaccaro Alessandra
    • Touzé Cyril
    • de F. Stabile André
    • Pastur Luc
    • Frangi Attilio
    Physical Review E, American Physical Society (APS), 2026, 113 (3), pp.034202. This work introduces a parametric simulation-free reduced order model for incompressible flows undergoing a Hopf bifurcation, leveraging the parametrisation method for invariant manifolds. Unlike data-driven approaches, this method operates directly on the governing equations, eliminating the need for full-order simulations. The proposed model is computed at a single value of the bifurcation parameter, yet remains valid over a range of values. The approach systematically constructs an invariant manifold and embedded dynamics, providing an accurate and efficient reduction of the original system. The ability to capture pre-critical steady states, the bifurcation point, and post-critical limit cycle oscillations is demonstrated by a strong agreement between the reduced-order model and full-order simulations, while achieving significant computational speed-up. (10.1103/w6z2-m5wk)
    DOI : 10.1103/w6z2-m5wk